At present several common boiler energy-saving technologies: usually for boiler manufacturers, it means that you are saving boiler to maximize the interests of customers, providing customers with unlimited fuel savings, the electricity consumption, water consumption and so on. But the wide range of energy-saving, does not refer to an aspect of optimization can save energy boilers, here's a look now common boiler energy-saving technologies: 1 furnace arch. Industrial boiler furnace arch is very important. Arch role is to cause the furnace hearth and the organization of the mixed gas and the radiation hot flue gas flow, ignition and combustion of the fuel in a timely manner. At present, the actual amount of industrial steam boiler with its rated load often do not match, the use of coal varies widely, but often with the design coal are quite different, so in actual use, often as necessary for the furnace arch modified to meet the needs of coals. Heteroaryl coal used by the inferior design coal, the boiler furnace exit gas temperature occurs is low (about 700 degrees), lower than 200 degrees design.
Dairy production and processing sectors, need a lot of steam on food drying, sterilization, stereotypes, such as processing, steam boiler essential. Xinjiang Ake Su Xinnong Dairy Co., Ltd. as a local brand, has a large market users. 2016, Akzo increased demand for dairy production, the original steam boiler company can not meet today's production needs. In the same year, Akzo dairy cooperation with our company, signed a series SZS 6 tons of steam pipe steam boilers, steam support for the dairy industry dairy production Aksu.
Gas boiler water treatment in the application of protective measures II: to prevent the boiler fire blasting has been included in the ministerial twenty counter-measures, including fire protection, including the FSSS has been promoting the use of many power plants, it highlighted a few points : 1. references to the fire blasting. Key anti-ministerial twenty measures of the five. Called boiler fire to prevent shooting accidents. The blast furnace is correct formulation, because electric boilers, oil-fired boiler and gas furnace boiler furnace explosion caused damage not only in the operation of the fire, the flare ignited focused overhaul of combustibles and purge the ignition is not the same explode resulting in damage to the furnace.
Fire boiler design pitch is much: a room, boiler production plant belongs to class D, to a steam boiler rated evaporation 4t / h, when the rated output is greater than 2.8MW reasonable price fired hot water boiler, the boiler room building fire resistance rating of not less than two ; rated evaporation steam boiler is less than or equal to 4t / h, when the hot water boiler is equal to or less than the rated output 2.8MW, between the boiler building fire resistance rating of not less than three; m-inter-tank, oil pump and the oil heater are inter production plant belonging to class C, not less than two of its construction fire rating, between said room is arranged within the auxiliary boiler room, a room should be set apart from other firewall; March and gas regulator production plant belonging to Group A, which building fire rating of not less than two, should be provided between the boiler room and the immediate neighborhood regulator firewall spaced boiler room, which doors should open outwards and should not directly access to the boiler room, the ground should not be spark Ping.
