gas fire tube condensing boiler

gas fire tube condensing boiler

June 22, 2018 in the evening around 6:40, Chongqing Hechuan keel village "Ding taste the food factory" fire tube condensing boiler exploded, the accident killed two people, three people were injured.

At the scene, boiler room Zhata, damaged boiler flew ten meters outside the field, next to a few factories are subject to different degrees of damage, around the ruins. But because not many nearby residents, no adverse impacts to other villagers.

According food factory owner friends when the accident occurred, both inside and outside the boiler room just five people. One person was killed and four people were injured, one of whom died en route to hospital, the other three in stable condition and is currently being treated in. It is understood, Ding taste the food factory is a small tofu factory, usually only a few factory workers. When the accident occurred, it is time off work, the boss's father, Huang uncle went to the boiler room, prepare a little help, but I do not know which part of improper operation, resulting in an explosion.

The boiler explosion, resulting in serious consequences and impact, but also sounded a warning for the steam boiler is using various food processing plants. Steam boiler output to high-temperature steam, with a certain risk, in use, to operate in strict accordance with the provisions, not miss any details, nor allow non-professional staff stoker boiler operation to avoid unnecessary losses.

1, boiler factory should be accompanied by "technical safety specifications of the design documents, product quality certification, safety and the use and maintenance instructions, supervision and inspection certificate (safety supervision and inspection certificate performance)."

2, boiler installation, maintenance, alteration. Engaged in the installation of the boiler, maintenance, renovation of the unit shall obtain special equipment installation and maintenance certificates issued by the Provincial Quality and Technical Supervision, before engaging in the boiler installation, maintenance, alteration. Construction unit before construction will be prepared for installation, maintenance, alteration in writing inform the special equipment safety supervision and management department of the municipality or district, and will start informing sent to the local county level Quality and Technical Supervision for the record, told immediately after construction.

3, inspection of boiler installation, maintenance, transformation. After construction, the construction unit of Special Equipment To Quality and Technical Supervision, Inspection and declared the boiler installation supervisory inspection and hydrostatic testing. After passing by the Quality and Technical Supervision, Special Equipment Inspection, County of Quality and Technical Supervision involved in overall acceptance.

4, registration boiler. After the boiler inspection, the use of units must be in accordance with the "special equipment registration and use of management rules", fill "boiler (census) Registration Form" to the Quality and Technical Supervision registered, and obtain a "safe use of special equipment registration certificate" .

5, operation of the boiler. Boiler operation must be performed by trained and qualified to obtain "special equipment operator certificate" certified personnel to operate, must strictly abide by the rules and eight systems, six record.

6, check the boiler. Periodic inspection of boiler once a year, not be used without safety periodic inspection of boilers. Safety accessories safety valve of the boiler regular inspection once a year, pressure gauge biannually verified, may not be used without the periodic inspection of the safety accessories.

How fuel (gas) fire tube condensing boiler stack height standards should be implemented as specified? Oil, gas boiler chimney of not less than 8 meters, the height of the boiler chimney by specific approval of environmental impact assessment documents OK. When there is a building within a radius of 200m from the new boiler room around the chimney, the chimney should be higher than the tallest building in more than 3m. "Boiler air pollutant emission standards" -GB13271-2014

What is the excess air coefficient of fire tube condensing boiler and boiler professionals work? Learning and understanding of the boiler, the following is mainly to answer some specific questions, which specifically is: What is the excess air ratio boiler? Its smoke is calculated, and what about? And, What are two boilers, not within the scope of supervisory inspection? Designed boiler work, which refers to what? What are the contents of their work? So, the next immediately to give a specific answer. 1. What is the excess air ratio boiler? Its smoke is calculated, and what about? Boiler excess air ratio, for the noun words, simply, is a boiler operation, the ratio between the actual and theoretical air consumption air consumption. For different types of boilers, it is not the same. For example, oil and gas furnace is 1.1, and the fluidized bed boiler, it is 1.1 to 1.2. As for the calculation of flue gas boiler, mainly related to combustion equipment type and fuel type two.

Four coal-fired fire tube condensing boilers precautions to meet a variety of fossil fuels and natural gas sectors of production, often require boiler, the general common is to transform into a coal-fired furnace gas-fired boiler, to change the high fuel costs of coal on the environment cause serious pollution problems, specific issues unique boiler is not a small project, you need to pay attention to a good close links with each transformation in order to avoid failure of transformation, on boiler should be noted that we have to understand the following description. 1, the original boiler demolition work; boiler before carrying out the original host and auxiliary boilers need to be demolished, concrete demolition work carried out by professional staff, in order to more quickly complete the demolition work with but also to prevent the demolition process in the event of any accident; 2, note that pressure capacity of the boiler; small boiler into the gas by the coal-fired, also changed the original negative and positive pressure combustion burner, the process you need to pay special attention throughout the furnace wall the structure and sealing, the sealing function, it might cause the boiler after the transformation could not withstand the pressure and accidents; 3, furnace renovation precautions; when in many cases will change the gas burner, because the fuel mist of poor or incomplete combustion of the fuel gas remaining in the furnace a little mistake will cause fire or explosion, it is carried out after completion of the transformation for an explosion vent installed in an appropriate position to prevent the explosion, while additional ignition flame protection means after the boiler guarantee safe operation; 4, after the transformation of the test; after the completion of high-quality boiler transformation, but also the need for reuse Sophisticated testing to confirm their safety, commonly used test method is boiler pressure after the transformation of high-pressure test, and finally pass a test meet the standard may be considered completed after the entire transformation boilers. Caution visible through major transformation over the course of gas boilers, boiler reconstruction requires not only technical but also need to meet the relevant standards in order to ensure more successful boiler and can be smoothly carried out using, of course, in the transformation of the former users need to analyze the structure of the entire boiler study, confirming boiler renovation project can be re-introduced in order to avoid unnecessary waste.

gas fire tube condensing boiler Related Information

NFC Condensing Fire Tube Combi-boilers

condensing fire tube combi-boilers More features, more bene ts, more extras and more value all in one package Now the innovator in high ef ciency condensing tankless water heaters and re tube boilers puts it all together in one amazing combi-boiler. 5 modes of external domestic recirculation control built-in

Get a Quote

K2 Firetube U.S. Boiler Company

The NEW K2 Firetube condensing boiler is an addition to the K2 high-efficiency series. Joining the K2 Watertube boiler, the K2 Firetube features a stainless steel vertical firetube heat exchanger and is available in six sizes. All models can be wall-hung and feature 5:1 modulation. The boilers dimpled, firetube heat exchanger provides lower pressure drop when compared to water-tube heat

Get a Quote

NTI Boilers

The FTV is a high-efficiency, wall-hung boiler equipped with a vertical fire tube heat exchanger GF200 The innovative GF200 is a unique Combi Furnace that offers a new dimension of comfort,

Get a Quote

Fire Tube Boiler Fire Tube Condensing Gas

Fire Tube Boiler Fire Tube Condensing Gas have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and

Get a Quote

ClearFire Condensing Boiler - Cleaver-Brooks

2018-8-5 · The extended heating surface design provides the ideal solution for the demands of a condensing boiler and helps to recover virtually all the latent heat of the flue gas. Each tube consists of an outer stainless steel tube (waterside) and the AluFer extended surface profile on the flue gas side. 99% at low fire and 95% at high fire.

Get a Quote

Condensing Fire Tube Boiler - ecoHVAC

2014-11-15 · Condensing Fire Tube Boiler FTC TITAN FEATURES Up to 97% efficiency 5 year heat exchange warranty 316Ti Titanium stainless steel condensing section Up to 6:1 modulation turndown 600 kPa operating pressure Volt free BMS interface for Run, flame failure, High temp cutout Remote temp reset capable Relief valve (supplied loose)

Get a Quote

K2 Firetube U.S. Boiler Company

The NEW K2 Firetube condensing boiler is an addition to the K2 high-efficiency series. Joining the K2 Watertube boiler, the K2 Firetube features a stainless steel vertical firetube heat exchanger and is available in six sizes. All models can be wall-hung and feature 5:1 modulation. The boilers dimpled, firetube heat exchanger provides lower pressure drop when compared to water-tube heat

Get a Quote

gas boiler condensing catalouge - stundenzettel

PARAT MEW Exhaust Gas Water Tube Boiler Water The water flow is generated by circulation pumps and . Ask Price Email Us. Marine Boilers Steam and Water system - Marine. Condensing Boilers - National Energy Foundation. It is mounted on a wall and the exhaust gases will rise through vapour produced by burning the gas. [email protected] > Get A

Get a Quote

Condensing Boiler Suppliers Manufacturers IQS

These condensing boiler companies can design, engineer and manufacture condensing boilers to your specifications and application need. A quick and easy to use request for quote form is provided for you to contact these condensing boiler manufacturers and suppliers.

Get a Quote

gas fired condensing boiler - dm-psp-tubes.be

Gas Fire tube Condensing Boil. The gas fire tube condensing boiler is a kind of safe and high efficiency heating equipment with full automatic control system. The fuel could be natural gas, LPG, city gas, propane, etc. The gas fired condensing boiler is fast assembly . Contact us

Get a Quote

Westinghouse Fire Tube Gas Boilers Residential

The Westinghouse Fire Tube Gas Boiler features an exclusively designed stainless steel heat exchanger with superior heat transfer and less exposure to corrosion and scale buildup. The Westinghouse Boiler has a sleek robust design and is offered as a space saving wall mount unit.

Get a Quote

CONDENSING FIRE-TUBE BOILER

2020-4-11 · CONDENSING FIRE-TUBE BOILER. Service light Out with the cold, in with the new XVers L. The XVers L, our newest hydronic boiler is built to automatically assess the temperature, and adjust to make Gas connection Air intake (direct vent) Water outlet Condensate trap Forklift/pallet-jack accessible base Stainless steel fire-tube heat exchanger

Get a Quote

gas fired condensing boiler - dm-psp-tubes.be

Gas Fire tube Condensing Boil. The gas fire tube condensing boiler is a kind of safe and high efficiency heating equipment with full automatic control system. The fuel could be natural gas, LPG, city gas, propane, etc. The gas fired condensing boiler is fast assembly . Contact us

Get a Quote

Westinghouse Universal Fire Tube Boiler

The Universal Fire Tube Boiler is for you! This ENERGY STAR ® certified boiler has an Annual Fuel Utilization Efficiency (AFUE) of 95% while homeowners with older gas furnaces may only be using as little as 60% of energy consumed.

Get a Quote

Westinghouse Fire Tube Gas Boilers Residential

The Westinghouse Fire Tube Gas Boiler features an exclusively designed stainless steel heat exchanger with superior heat transfer and less exposure to corrosion and scale buildup. The Westinghouse Boiler has a sleek robust design and is offered as a space saving wall mount unit.

Get a Quote

Do You Want To Get An Exclusive Project Plan ?

7 * 24 * 365 endless service, click the button to provide you with professional and fast solutions at any time

Scroll to Top